The
J-1450 has the same drain cleaning power as our popular J-1600,
but it's more compact. You can take this jet into some really
tight spaces. And if you want to put it into a car trunk, you
can take off the reel in seconds and load the machine in two pieces.
Overall height is 32", and when you remove the 200 ft. capacity
reel, the height drops to 14-1/2".
The telescoping handle on the J-1450 makes it easy to roll the
machine to and from the job, and then slides out of your way when
you're on the job. A low center of gravity keeps the J-1450 solidly
in place while you work.
The J-1450 is powered by a 1-1/2 hp (13 amp) sealed motor with
an in-line Ground Fault Circuit Interrupter. The dual capacitor
motor is totally enclosed, so water won’t harm it or pose
a shock hazard.
A 1500 psi, 1.7 GPM triplex pump is equipped with Vibra-pulse®
to work the hose around tight bends in small lines. This unique
feature allows the flow rate to remain the same whether Vibra-pulse®
is on or off. Safety features include a thermal relief valve to
protect the pump from heat damage, as well as a back-flow check
valve and inlet filter.
J-1450 ELECTRIC JET Basic Unit INCLUDES 1-1/2 hp Motor
with GFCI (115v/13 amp),
1500 psi/1.7 gpm Triplex Pump with Vibra-Pulse®, 200 ft. Capacity
Hose Reel, Pressure Gauge and Rubber Gloves.
J-1455 ELECTRIC JET Basic Unit - same as J-1450
without Hose Reel
The following units, which are COMPLETE AND READY TO OPERATE,
consist of J-1450 Electric Jet (basic unit), and equipment as
indicated:
J-1450-A with 150' x 1/4" (150JH1) and 30'
x 1/8" (30JH00) hoses with JN-0 and
JN-10 nozzle sets.
J-1450-C with 150' x 1/4" (150JH1) and 75'
x 1/8" (75JH00) hoses with JN-0 and
JN-10 nozzle sets.
J-145-200 Hose Reel Assembly for J-1450
