|



|

The Model E gasoline
powered Rodrunner is ideal for cleaning long runs up to 500 ft.
down the line. It can be coupled to either 10 ft. sectional cables
to clear up to 14" lines or 5/16" municipal rods to clear
lines up to 24" in diameter. The operator stands behind machine
and walks cables or rods into line.
It is driven by a powerful
6.5 hp (9.00 ft-lb) engine with an easily accessible throttle control on the handle.
Drive speed is set at 100 to 200 rpm for municipal rods and 200
to 400 rpm for sectional cables.
The “hot-shift”
transmission lets you switch from forward to reverse without the
need for a clutch. The long gear shift lever is within easy reach
of the operator. And features like the 3/4" lifetime lubricated
drive chain and safety slip clutch to protect cables and rods against
excessive torque build-up means low maintenance. |
Rodrunner Cutter Set for 1-1/4" Sectional Cables
Catalog # RDCS-G or RDCS-L or RDCS-R |
|
Part Number with "G" Connector
|
Part Number with "L" Connector
|
Part Number with "R" Connector
|
|
|
|
|
|
|
Starting Drill (Gets water flowing)
|
|
|
|
|
|
For removing loose objects and broken cables
|
|
|
|
|
|
|
|
|
|
|
|
For roots and other stoppages
|
|
|
|
|
|
For roots and other stoppages
|
|
|
|
|
|
For removing loose objects and broken cables
|
|
|
G-CW |
|
|
To disconnect cables and cutters
|
|
Note: All cutters shown with 'G'
Connectors.
|
Model "E" Gasoline Powered Rodrunner Units- Complete and Ready to Operate |
| RD-E-M Basic Unit INCLUDES E-MRDC Municipal Rod Coupler, Safety Clutch,
Leather Gloves, Tool Box, 6.5 hp Engine, Forward-Reverse Transmission,
and 10" Pneumatic Tires. |
| RD-E-SG Basic Unit INCLUDES EG-CDC Sectional Cable
Drive Coupler for "G" Connectors, Safety Clutch, Leather
Gloves, Tool Box, 6.5 hp Engine, Forward-Reverse Transmission, and
10" Pneumatic Tires. |
| RD-E-SL Basic Unit same as RD-E-SG, except with
EL-CDC Sectional Cable Drive Coupler for "L" Connectors. |
| The above units do not include cables, rods or cutters. |
|
| The
following units, which are COMPLETE AND READY TO OPERATE,
include Basic Unit indicated, standard cutter set with connectors
to match the basic unit, and rods or cables as indicated: |
RD-E-M-A includes RD-E-M, 62 3MSR 39" Municipal
Rods (201.5 ft./62m),
and MCS Cutter Set.
|
RD-E-SG-B includes RD-E-SG, CF Cable Feeding Tool,
Twenty 10GP Proflex
Sections (200 ft./60m) and EGCS Cutter Set.
|
RD-E-SL-C includes RD-E-SL, CF Cable Feeding Tool,
Twenty 10LP Proflex
Sections (200 ft./60m) and ELCS Cutter Set. |
Model
E Rodrunner Specifications |
Weight:
185 lbs. (84 kg) |
Dimensions:
29" wide x 44" long x 40" high. (74 cm x 112 cm x 102 cm)
Handle removable for easy storage. |
Engine:
6.5 hp Briggs and Stratton four cycle with throttle on handle. |
Transmission:
Snow and Nabstedt reversing hot-shift transmission drives 3/4"
lifetime lubricated roller chain.
No clutch or throttle needed. |
Speed Range:
From 100 rpm to 200 rpm for municipal rods; 200 to 400 RPM for sectional
cables. |
Slip Clutch:
Protects against excessive torque being applied to cable or rods. Easily
adjustable. |
Coil Spring Sections:
1 1/4" x 10 ft. long with inner spring to handle torque better than
hollow cables. |
Cutter Set with
G Connectors:
Spear Head, Hook Auger, 2" U-Cutter, 3" Heavy Duty Side Cutter,
3" Heavy Duty Saw Blade,
4" Rotary Saw Blade, Large Retrieving Tool, Coupling Wrench. |
Cutter Set with
L Connectors:
Spear Head, Hook Auger, 2" U-Cutter, 3" Heavy Duty Side Cutter,
3" Heavy Duty Saw Blade,
4" Rotary Saw Blade, Large Retrieving Tool, Coupling Wrench. |
|
|