|
|
The Super-Vee offers you
a complete system for cleaning drain lines through 3” in diameter.
With a variety of cables, cutter and accessories available, you
have the right combination for any clogged drain problem.
The Super-Vee
is built to clear clogged drains for a decade or more. And our Dyna-Thrust™
bearing system is one reason why. It helps carry the weight of the
drum, significantly reducing wear on the motor shaft bearing and
extending the life of the tool. Of course the cables are Flexicore®
– with an integral wire rope center. Nobody makes cables like
General.
|
|
| With
a quick movement of the Grip Shield, you release or engage the
cable – without the need for a chuck, and with automatic
adjustment for different cable diameters. As a result, you get
your cable into the line faster, pull it out faster, and have
full control at all times. Because the Slide Action Chuck is
linked to the Grip Shield, handling is easy and comfortable. |
|
|
To switch to
a different diameter cable,
you just loosen three screws, pull the front of the drum off the cable,
and load another cartridge. Changing takes less than a minute and
turns what could be a messy job into a clean one. The tough plastic
cartridges are so inexpensive, you’ll probably want to store
all of your Super-Vee cables in them. |
HECS Handylectric Cutter set |
|
Part Number |
Cutter Name |
Application |
|
AH |
Arrow Head Starting Drill |
Starting Drill (Gets water flowing) |
|
BG |
Boring Gimlet |
For removing loose objects |
|
DHBG |
Down Head Boring Gimlet |
For removing loose objects (Goes down waste, not up stack) |
|
FAH |
Flexible Spring Arrow Head Cutter |
Starting Drill (For sharp turns in small lines) |
|
1-1/4 SCB |
1-1/4 Side Cutter Blade (2 piece set) |
For cutting and scraping |
Super-Vee Units - Complete and Ready to Operate |
SV-A-WC Including case, 25 ft. x 1/4" (25HE1), 25 ft. x 3/8"
(25HE2) cables,
HECS cutter set and cartridges. |
SV-B-WC Including case, 25 ft. x 1/4" (25HE1), 35
ft. x 3/8" (35HE2) cables,
HECS cutter set and cartridges. |
SV-C-WC Including case, 50 ft. x 1/4" (50HE1), 35
ft. x 3/8" (35HE2) cables,
HECS cutter set and cartridges. |
| SV-D-WC Including case and 25 ft. x 5/16" (25HE1-A)
cable. |
| SV-F-WC Including case and 25 ft. x 1/4" (25HE1)
cable. |
| To order without case, delete suffix “WC”, as SV-A. |
| 220/230 & 240 Volt/50 Hz units are available. |
Super-Vee™
Specifications |
Motor:
All ball-bearing, double-insulated, reversible motor with variable speed
control;
0 – 500 rpm. |
Drum:
Heavy gauge stamped aluminum with inner drum to prevent cable tangling. |
Capacity:
50 ft. of 1/4" or 5/16" cable; 35 ft. of 3/8" cable.
All cables are left hand wound and reinforced with a wire rope center. |
Cutter Set:
Arrow Head, Boring Gimlet, Down Head Boring Gimlet, 1-1/4" Side Cutter
Blade, Flexible Arrow Head |
Cable Cartridges:
Light weight, impact resistant plastic. |
Slide Action
Chuck:
Grip shield moves back to engage cable, forward to release it.
Automatically adjusts for different diameter cables. |
UL Listed and CSA
Approved |
|
|
