We’ve
miniaturized our big machine power cable feed and put it on the Super-Vee
to give you feeding speed and convenience you haven’t seen before
in a hand-held power drain cleaner.
In tight or awkward places, the Power-Vee is like having an extra hand.
To
feed the cable just start the Power-Vee and squeeze the feed lever;
to retract it, reverse the motor and squeeze the lever. The feed
handles 1/4", 5/16" and 3/8" cables. No adjustment,
disassembly, or additional parts required.
Our Dyna-Thrust™
bearing system helps carry the weight of the drum, significantly
reducing wear on the motor shaft bearing and extending the life
of the tool. Also adding to the Power-Vee’s durability is the
heavy-gauge stamped aluminum drum. Of course the cables are Flexicore®
– with an integral wire rope center. Nobody makes cables like
General.
Feed 3/8" cable at 16 feet per minute.
The feed handles 1/4", 5/16" and 3/8" cables - no adjustment, disassembly or additional parts required.
To
switch to a different diameter cable (or even connect two 3/8”
cables together), you just loosen three screws, pull the front of
the drum off the cable, and load another cartridge. Changing takes
less than a minute and turns what could be a messy job into a clean
one. The tough plastic cartridges are so inexpensive, you’ll
probably want to store all of your cables in them.
HECS Handylectric Cutter set
Part Number
Cutter Name
Application
AH
Arrow Head Starting Drill
Starting Drill (Gets water flowing)
BG
Boring Gimlet
For removing loose objects
DHBG
Down Head Boring Gimlet
For removing loose objects (Goes down waste, not up stack)
FAH
Flexible Spring Arrow Head Cutter
Starting Drill (For sharp turns in small lines)
1-1/4 SCB
1-1/4 Side Cutter Blade (2 piece set)
For cutting and scraping
Power-Vee Units - Complete and Ready to Operate
Basic
Unit Includes:
• Power Cable Feed
• Variable Speed Motor with Reverse Switch
• Quick-Change Cable Cartridge
PV-A-WC with case, 25 ft. x 1/4" (25HE1-DH), 25
ft. x 3/8" (25HE2) cables,
HECS cutter set and one additional cartridge. Boxed Weight 33
lbs.
PV-B-WC with case, 25 ft. x 1/4" (25HE1-DH), 35 ft.
x 3/8" (35HE2) cables,
HECS cutter set and one additional cartridge. Boxed Weight 36
lbs
PV-C-WC with case, 50 ft. x 1/4" (50HE1-DH), 35
ft. x 3/8" (35HE2) cables,
HECS cutter set and one additional cartridge. Boxed Weight 39
lbs.
PV-D-WC with case, 25 ft. x 5/16" (25HE1-A-DH) cable.
Boxed Weight 27 lbs.
PV-F-WC with case, 25 ft. x 1/4" (25HE1-DH) cable.
Boxed Weight 26 lbs.
To order without case, delete suffix “WC”, as SV-A.
220/230 & 240 Volt/50 Hz units are available.
Power-Vee™
Specifications
Motor:
All ball-bearing, double-insulated, reversible motor with variable speed
control;
0 – 500 rpm.
Drum:
Heavy gauge stamped aluminum with inner drum to prevent cable tangling.
Capacity:
50 ft. of 1/4" or 5/16" cable; 35 ft. of 3/8" cable.
All cables are left hand wound and reinforced with a wire rope center.
Cutter Set:
Arrow Head, Boring Gimlet, Down Head Boring Gimlet, 1-1/4" Side Cutter
Blade,
Flexible Arrow Head Cutter
General
Pipe Cleaners, Division of General Wire Spring Company
1101 Thompson Avenue
McKees Rocks, PA 15136 USA
800-245-6200 or 412-771-6300
FAX 412-771-2771
