|
|
|
Equipped with
a variable speed power cable feed and variable speed motor, the
Drain-Rooter PH makes drain cleaning jobs cleaner and easier.
The Drain-Rooter PH feeds and retrieves the cable at up to 16
feet per minute. A four-foot guide hose eliminates cable whipping,
dirty fixtures and messy floors. And the drum speed can be varied
by changing the pressure on the foot pedal, making it easier to
thread the boring head through strainers or crossbars.The Drain-Rooter
PH is a real labor-saver on long jobs or when working in a cramped
area where the weight of the machine could get burdensome. It
can be operated in both horizontal and vertical positions to get
closer to the drain opening.
A
quick-change cartridge system allows you to switch to a different
diameter cable without pulling the old cable out of the drum –
another way the Drain-Rooter PH is a clean machine.
|
|
|
|
Wire Rope
Center Construction
Heavy-gauge wire coiled tightly around 49-strand aircraft-type wire
rope and heat treated. Has unequalled strength and the right amount
of flexibility. So tough it carries a one-year warranty against defect
or breakage.
Flexicore Patent Nos. 2,244,735 and 2,849,870 |
HECS Handylectric Cutter set |
|
Part Number |
Cutter Name |
Application |
|
AH |
Arrow Head Starting Drill |
Starting Drill (Gets water flowing) |
|
BG |
Boring Gimlet |
For removing loose objects |
|
DHBG |
Down Head Boring Gimlet |
For removing loose objects (Goes down waste, not up stack) |
|
FAH |
Flexible Spring Arrow Head Cutter |
Starting Drill (For sharp turns in small lines) |
|
1-1/4 SCB |
1-1/4 Side Cutter Blade (2 piece set) |
For cutting and scraping |
Drain-Rooter PH Units - Complete and Ready to Operate |
Basic
Unit Includes:
• Variable Speed Power Cable Feed
• Variable Speed Motor with Reverse Switch
• Water-Proof Air Foot Switch
• Quick Change Plastic Cartridge
• Four Foot Guide Hose |
| PH-DR-A with 50 ft. x 5/16" (50HE1-A-DH) cable. |
| PH-DR-B with 50 ft. x 5/16" (50HE1-AC) cable, and
HECS cutter set. |
| PH-DR-C with 35 ft. x 3/8" (35HE2) cable, and HECS
cutter set. |
| PH-DR-D with 50 ft. x 1/4" (50HE1-DH) cable. |
Drain
Rooter PH™ Specifications |
Weight:
Weight: 22 lbs. (10 kg) (without cable) |
Dimensions:
22” deep x 13-1/2” wide x 15” high (without hose) (56 cm
x 34 cm x 38 cm) |
Drum:
Heavy gauge stamped aluminum with inner drum to prevent cable tangling. |
Capacity:
50 ft. of 1/4" or 5/16" cable; 35 ft. of 3/8" cable.
All cables are left hand wound and reinforced with a wire rope center. |
Power Cable Feed:
Drives 1/4", 5/16" and 3/8" cables. |
Cutter Set:
Arrow Head, Boring Gimlet, Down Head Boring Gimlet, 1-1/4" Side Cutter
Blade,
Flexible Arrow Head Cutter |
Motor:
All ball-bearing, double insulated, reversible motor with speed control;
0-400 rpm, 230 and 240 volts available. |
Foot Pedal:
Pneumatic foot pedal controls variable speed motor. Leaves operator’s
hands free to control cable. |
Motor UL Registered
|
|
