This sectional cable machine combines power, maneuverability, and light weight in an easy to use package that speeds up drain cleaning work. Just press down on the chuck handle, and a 3/4 hp motor spins 1-1/4" cable at 715 rpm, cleaning lines up to 10" in diameter 200 feet away.

The Hot-Rodder stands tall on the job. But it stands small in your truck, thanks to a handle that folds over in seconds to make the machine more compact. You can also use the handle as an aid when loading the machine into your truck. And the Hot-Rodder’s big 10" wheels make it easy to move the machine to and from the job.

The frame and handle are powder coated. The high density plastic motor cover is so tough it can stand up to sledge hammer blows. The frame is powder coated and the handle is chrome plated, so the machine will look newer longer.

You can also use the machine to drive 7/8" x 15' sections by changing to an optional set of chuck jaws (R-R10AD) - a two minute job - to clear smaller lines.

Rodrunner Cutter Set for 1-1/4" Sectional Cables Catalog # RDCS-G or RDCS-L or RDCS-R
Cutter Name	Part Number with "G" Connector	Part Number with "L" Connector	Part Number with "R" Connector	Application	Photo
Spear Head	G-SHD	L-SHD	R-SHD	Starting Drill (Gets water flowing)
Hook Auger	G-HA	L-HA	R-HA	For removing loose objects and broken cables
2" U-Cutter	G-2UC	L-2UC	R-2UC	For cutting and scraping
3" Heavy Duty Saw Blade	G-3HDB	L-3HDB	R-3HDB	For roots and other stoppages
4" Rotary Saw Blades	G-4RSB	L-4RSB	R-4RSB	For roots and other stoppages
Retrieving Tool	G-RTR-2	L-RTR-2	R-RTR-2	For removing loose objects and broken cables
Coupling Wrench	G-CW	L-CW	R-CK	To disconnect cables and cutters

Note: All cutters shown with 'G' Connectors.

Hot-Rodder ™ Specifications

Weight: 96 lbs. (43.5 kg)

Dimensions: 19" deep; 20" wide; 42" high (48 cm X 51 cm X107cm)

Motor: Heavy-duty 3/4 hp with capacitor and 20ft. (6m) power cord rotates cables at 715 rpm. Equipped with Ground Fault Circuit Interrupter.

Chuck Handle: Supplies the necessary leverage and grip to spin 200ft. (60m) of cable.

Rear Guide Hose: Snaps onto bracket at rear of machine to limit cable whipping.

Folding Handle: Tall enough for easy transport; folds to take less room in the truck.

Wheels: 10” semi-pneumatic heavy duty with ball bearings.