Weight:
92 lbs. (42 kg) without cable

Dimensions:
27" deep x 18-1/2" wide x 46" high
(26" high with handle folded down)
68.5cm deep x 47cm wide x 117cm high
(66cm with handle folded down)

Drum Capacity:
50 ft. x 3/4" (15m x 19mm)
75 ft. x 5/8" (22.5m x 15.8mm)
100 ft. x 1/2" (30m x 12.7mm)

Drum Removal:
Remove one bolt and slide drum off shaft.

Motor:
1/3 hp with capacitor start, forward-off-reverse switch,
20 ft. power cord and ground fault circuit interrupter.

Foot Switch:
Pneumatic, with no electrical contact between pedal and motor.

Power Cable Feed:
Drives and retracts cable at variable speed without having to reverse motor rotation.

Wheels:
10" semi-pneumatic with roller bearings.

Wheel brake:
Passive wheel brake system holds the machine in place on the job and in the truck.

Truck Loading Wheel:
Enables one person to lift machine into truck bed.

Cutter Holder:
Cutter Holder on the frame keeps all the cutters within easy reach.

Leather Gloves:
For hand protection when guiding cable.

Cables:
Left-wound Flexicore wire rope center. 3/4" for 4" to 10" lines and 3" lines without sharp bends;
5/8" diameter for 3" to 6" lines;
1/2" diameter for 2" to 3" lines.