| Root 66 ™ Specifications |
| Weight: 42 lbs. (19 kg) |
| Dimensions: 16" deep; 14" wide; 17" high. (40 cm x 35 cm x 43 cm) |
| Motor: Sealed 1/2 hp with forward – off – reverse switch, ten foot power cord and ground fault circuit interrupter. |
| Drums: Small drum holds 25 ft. x 5/16" cable for 1-1/2" to 2" lines. Large drum holds 35 ft. x 3/8" cable for 2 to 3" lines. |
| Drip Guards: Two shields to protect bearings and motor from dirt and moisture. |
| Clutch: Pull down two position handle to spin cables at 400 RPM. Lift to stop. Brake stops spinning drums instantly. |
| Cables: 7 1/2 ft. x 5/8" (Cat #7.5R8) for 1-1/4 to 3" lines up to 100 ft. 15 ft. x 7/8" (Cat # 15R10) for 2 to 4" lines up to 125 ft. “T” slot couplings slide together to lock and uncouple. |
| Cutter set for 7/8"
cables: Spear Head, 2" U-Cutter, 3" U-Cutter, Hook Auger and Retrieving Tool. |
| Cutter set for 5/8"
cables: Arrow Head, Boring Gimlet, 1-1/2” U-Cutter and Retrieving Tool. |
| Jaws: Drive both 5/8" and 7/8" cables without adjustment; also grip containers for smaller diameter cables. Keyed for longer life and less slippage. |
| Leather Gloves: Double palm, for hand protection when guiding cable. |