Basic Unit Includes:

• 1/3 hp Motor with Forward-Off-Reverse Switch
• 8” Wheels and Folding Handle
• Air Foot Switch
• Safety Slip Clutch
• Open Drum

P-XP-A-O

With 50’ x 3/8” (50EM2) Cable, MRCS Cutter Set, Power Cable Feed and Guide Tube

P-XP-B-O

With 75’ x 3/8” (75EM2) Cable, MRCS Cutter Set, Power Cable Feed and Guide Tube

P-XP-C-O

With 50’ x 1/2” (50EM3) Cable, MRCS Cutter Set, Power Cable Feed and Guide Tube

P-XP-D-O

With 75’ x 1/2” (75EM3) Cable, MRCS Cutter Set, Power Cable Feed and Guide Tube

Weight:
67 lbs. (30 kg) with power cable feed and without cable.

Dimensions:
24" deep x 18" wide x 38" high with handle folded down
(61 cm x 46 cm x 96 cm).

Drum:
Equipped with inner drum cage and distributor tube to prevent cable tangling under load.
Quickly removable from frame. Available in open or closed design.

Wheels:
8" semi-pneumatic tires with oilite bronze bushings.

Folding Handle:
Reduces storage space.

Motor:
1/3 hp with forward-off-reverse switch, spring loaded mounting for proper belt tension.
(Load speed 165 rpm).

Belt Guard:
High impact plastic, secured with knob.

Power Cable Feed:
Drives 1/2" and 3/8" cables.

Cable Guide Tube:
Keeps operators hands clean and off spinning cable.  5 ft. extensions available.

Foot Pedal:
Leaves operator's hands free to control cable.
Uses air pressure, so there's no electrical contact between pedal and motor.

Power Cord:
10 ft. 3 wire. in-line ground fault circuit interrupter.

Leather Gloves:
With double-reinforced palm for hand protection when guiding cable.

J-Drum:
Capacity of 50 ft. of 1/4" or 5/16" Flexicore cable.

Dual Drum:
Capacity of 25 ft. of 1/4" or 5/16" in inner drum.
50 ft. of 5/16" or 35 ft. of 3/8" Flexicore cable in outer drum.